A Techno-Economic Analysis of Geothermal Energy in West Java

Allen Haryanto Lukmana, Mia Ferian Helmy

Abstract


Geothermal energy is a source of heat energy contained within the earth. The utilization of geothermal energy can be done in two ways, direct use and indirect use. The utilization of geothermal energy directly for non-electric purposes naturally tends to utilize thermal energy on-site rather than converting it into electrical energy. The utilization of geothermal energy directly for non-electric purposes naturally tends to utilize thermal energy on-site rather than converting it into electrical energy. The basis for the analysis of the plan to develop the direct use of geothermal areas and its surroundings is carried out in stages: Formulation of the problem, Formulation of Analysis Assumptions, Data collection, Available Geothermal Source Classification, Classification of Economic Activities, Integration of Available Geothermal Resources and Economic Activities. The analysis is used in the calculation of the energy requirements of the tea drying process in Malabar. Direct utilization of geothermal in the case of the Malabar tea factory is Recommended with Capital Cost of direct geothermal utilization can be paid off within a period of 20 years, then the production cost per year is 7.112 billion / 20 = 355.6 million rupiah.


Keywords


geothermal, Techno, Economic, Analysis, heat energy

Full Text:

PDF

References


Craig, J. J., 2005. Introduction to Robotics: Mechanics and Control. Third EDT. Canada: Pearson Prentice Hall.

Cuevas, E., Zaldivar, D., Tapia, E. & Rojas, R., 2007. An Incremental Fuzzy Algorithm for The Balance of Humanoid Robots.

Czarnetzki, S., Kerner, S. & Urban, O., 2010. Applying Dynamic Walking Control for Biped Robots. RoboCup 2009: Robot Soccer World Cup XIII, Lecture Notes in Computer Science, Volume 5949, pp. 69 - 80.

Damen CNC, 2009. [Online]

Available at: http://www.damencnc.com/damencnc.php?dir=cpt&idComp=195&langId=EN

Das, L., 2012. Prediction of Inverse Kinematics Solution of a Redundant Manipulator using ANFIS, Rourkela: s.n.

Dohyun Kim, Doyoung Jeon, 2011. Fuzzy-Logic Control of Cutting Forces in CNC Milling Processes using Motor Currents as Indirect Force Sensors. Precision Engineering, Volume 35, p. 143–152.

Duffie. J.A. Beckman. WA, 2006. Solar Engineering of Thermal Processes. Three EDT. s.l.: John Wiley & Sons, Inc.

Ekkachai K, Komin U, Chaopramualkul W, Tantaworrasilp A, Kwansud P, Seekhao P, Leelasawassuk T, Tanta-Ngai K, Tungpimolrut K., August 18-21, 2009. Design and Development of an Open Architecture CNC Controller for Milling Machine Retrofitting. Fukuoka International Congress Center, Japan, s.n., pp. 5629-5632.

Entingh, D. J. & Easwaran, E. a. L. M., 1994. Small Geothermal Electric Systems for Remove Power. Geothermal Resources Council Bulletin, pp. 331-338.

Erbatur, K. & Kurt, O., 2009. Natural ZMP Trajectories for Biped Robot Reference Generation. IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, March.Volume 56.

European Committee for Standardization, 2006. Thermal Solar Systems and Components - Solar Collector - Part 2: Test Methods, London, UK: s.n.

F. Libert, J. Soulard, 2004. Design Study of Different Direct-Driven Permanent-Magnet Motors for a Low-Speed Application. Trondheim, Norwegia, s.n., pp. 1-6.

Fanuc LTD Japan, 1988. Fanuc Operator’s manual. s.l.:s.n.

Farzadpour, F. & Danesh, M., 2011. GA Based Trajectory Generation for a 7-DOF Biped Robot by Considering Feet Rotation during Double Support Phase.

Feng, Y., Yao-nan, W. & Yi-min, Y., 2012. Inverse Kinematics Solution for Robot Manipulator based on Neural Network under Joint Subspace. International Journal of Computers and Communications, September, Volume 7, No.3, pp. 459-472.

Fujisaki, K., R. Hirayama, dan Y. Nemoto, 2004. Electromagnetic Steel Solution in Electromagnetic Field, s.l.: s.n.

G. Rzevsski, 2003. On Conceptual Design of Intelligent Mechatronics System. Mechatronics, 13(10), pp. 1029-1044.

GSK CNC, 2007. [Online]




DOI: https://doi.org/10.31098/ess.v1i1.130

Article Metrics

Abstract view : 28 times
PDF - 10 times

Refbacks

  • There are currently no refbacks.


Copyright (c) 2020 Allen Haryanto Lukmana, Mia Ferian Helmy

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

PUBLISHED BY:

LPPM UPN “Veteran” Yogyakarta, RSF PRESS & RESEARCH SYNERGY FOUNDATION

Proceeding of LPPM UPN “Veteran” Yogyakarta Conference Series 2020 – Engineering and Science (ESS). 

Mailing Address: 
Research Synergy Foundation
Jalan Nyaman no 31 
Komplek Sinergi Antapani 
Bandung 40291 - Indonesia. 

Gedung Rektorat Lt. 3 
Universitas Pembangunan Nasional "VETERAN" Yogyakarta 
Jl. SWK 104 (Lingkar Utara)
Condong Catur
Yogyakarta 55283 - Indonesia. 

Email:info@upnconfeseries.com

 
The Proceeding of LPPM UPN “Veteran” Yogyakarta Conference Series 2020 – Engineering and Science (ESS) is indexed by:
 
  
 
 
Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.