Preliminary Design Calculation of Stress Corrosion Cracking (SCC) Machine
Abstract
This research aims to evaluate the design calculation of stress corrosion cracking (SCC) machine. The design calculation was based on the specimen standard of SCC in the constant load set up for Aluminum alloys by using mechanics material principles. The results of the design calculation show that the minimum radius horizontal material support, horizontal walking support, and horizontal load support were 8.50, 9.73, and 6.7 mm that is made of steel, respectively. The minimum radius of specimen support and the load support is 3.2 mm that is made of steel and 1.75 mm that is made of stainless steel, respectively. The height of the walking load support in the center must be higher than the height of the walking load support in the corner as per moment calculation.
Keywords
Full Text:
PDFReferences
Anon., ASM Aerospace Specification Metals Inc. Available at http://asm.matweb.com/search/SpecificMaterial.asp?bassnum=MA6061T6, Accessed 2020.
Cwalina, B., 2014. Biodeterioration of concrete, brick, and other mineral-based building materials. In: T. Liengen, R. Basseguy, D. Feron, and I. B. Beech, 1st eds. Understanding Biocorrosion: Fundamentals and Application: Woodhead Publishing. 281-312.
Dietzel, W., and Srinivasan, P. B., 2011. Testing and evaluation methods for stress corrosion cracking (SCC) in metals. Australia: Woodhead Publishing Limited.
Geissler, D., Uhlemann, M., and Gebert, A., 2019. Catastrophic stress corrosion failure of Zr-base bulk metallic glass through hydrogen embrittlement. Corrosion Science, 159, 108057.
Hamann, C. R., and Hamann, D., 2018. Metals in Everyday Life. In: J. T. J.K. Chen, ed. Metals allergy: Springer International Publishing, 137-162.
Kumar, M. V., Balasubramanian, V., Rajakumar, S., and Albert, S. K., 2015. Stress Corrosion Cracking Behaviour of Gas Tungsten Asr welded Super Austenitic Stainless Steel Joints. Defense Technology, 11, 282-291.
Popoola, L. T. et al., 2013. Corrosion Problems during Oil and Gas Production and Its Mitigation. International Journal of Industrial Chemistry, 4 (35), 1-15.
Rao, M. A., Babu, R. S. & Kumar, M. V., 2018. Stress Corrosion Cracking Failure of SS316L High-Pressure Heater Tube. Engineering Failure Analysis, 90, 14-22.
Rao, A. C. U., Vasu, V., Govindaraju, M. & Srinadh, K. V. S., 2016. Stress Corrosion Cracking Behaviour of 7xxx Alumunium Alloys: A Literature Review. Transactions of Nonferrous Metals Society of China, 26 (6), 1447-1471.
Robert, R., 2020. Metals for Buildings: Essential & Fully Recyclable: International Polar Foundation.
Shen, S. et al., 2019. A Study on Stress Corrosion Cracking and Hydrogen Embrittlement of Jethete M152 Martensitic Stainless Steel. Material Science and Engineering A, A740-741, 243-251.
Wu, S. et al., 2018. Investigation of Cable Bolts for Street Corrosion Cracking Failure. Construction and Building Materials, 187, 1224-1231.
DOI: https://doi.org/10.31098/ess.v1i1.91
Article Metrics
Abstract view : 148 timesPDF - 18 times
Refbacks
- There are currently no refbacks.
Copyright (c) 2020 Y Amalia, A. Sudiyanto, F. Rahmawati, S.U. Santoso, Z.N.Y. Pratama, E. Pujiyulianto
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
PUBLISHED BY:
LPPM UPN “Veteran” Yogyakarta, RSF PRESS & RESEARCH SYNERGY FOUNDATION
Proceeding of LPPM UPN “Veteran” Yogyakarta Conference Series 2020 – Engineering and Science (ESS).
Mailing Address:
Research Synergy Foundation
Jalan Nyaman no 31
Komplek Sinergi Antapani
Bandung 40291 - Indonesia.
Gedung Rektorat Lt. 3
Universitas Pembangunan Nasional "VETERAN" Yogyakarta
Jl. SWK 104 (Lingkar Utara)
Condong Catur
Yogyakarta 55283 - Indonesia.
Email:info@upnconfeseries.com
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.